How to Identify Faults For Washing Machines

I am a washing machine, dishwasher and tumble dryer engineer, and my customers are usually pretty good at explaining what the fault is. However, a few extra tips from an engineers point of view might suffice to help you as a Customer to help me trace a fault quickly. It could be very helpful if as much information as possible is given to the build-up leading up to when the machine started to go wrong. If the fault description is not quite right, its easy to start at the wrong end of the problem and waste a lot of time.(a classic case of going round the moon to get to your…..well I’ll leave it there!). Sometimes its difficult because you switch it on and walk away and you don’t notice anything until it goes obviously horribly wrong. Take time out and observe exactly what’s happening and at what point its happening maytag washer repair los angeles.

Before you call an engineer there are some simple checks that you can do, which not only can help an engineer if you call one but, you never know, you might avoid calling him out at all. There are the obvious faults, of cause. If the machine is full of water and not draining, (also, this produces another symptom, the machine will not spin the clothes at the end of the wash programme, its not the spin function that’s wrong its the fact that there’s water still in the drum which will stop it spinning). Try this, some machines have a drain only function, this eliminates any noise from something else happening, like the drum turning for instance, if there isn’t a drain only function select a spin and there should be a minute or two before the drum starts turning meanwhile you should hear the sound of the drain pump churning. Can you hear anything? No! then the drain pumps not working. If its a Yes! then there is a blockage somewhere.

The other obvious one is if nothing happens at all when you switch on, some machines have some form of ‘mains on’ indicator light, if its not on when you push the mains switch on then there is no power going to the machine. Check the mains electric socket that the machine uses, plug a table lamp into the socket, and see if you’ve got power to the machine. If not, check the fuse in the plug, sounds obvious, but its worth checking. If you’ve got power to the machine then its possibly the door switch on the door of the machine, so you would call an engineer for that.

If its being incredibly naughty and spilling water all over the floor (then you’ve got the Deluxe model there then..it cleans your floor as well!). Turn everything off like the water taps (usually under the sink) to the machine and unplug the mains plug, then call someone. That goes for the machine tripping safety switches or blowing electric mains fuses as well. What I mean is those faults that the machine is working but then stops or doesn’t do something that it should. Try a few things out first, does the timer stop at the same point in the cycle? On electo-mechanical timer units (you can identify this type as the dial you set your programme with and clicks on a detent mechanism as you turn it around, and turns around as the wash programme advances). If it stops or the machine just carries on indefinitely doing the same function with the timer just sticking in the same place or you have to click the timer on one click and the machine carries on. Before you do that though, mark it with a pencil on the dial and on the corresponding part of the panel. Then the engineer can see the exact point the fault is occurring. This type of fault can indicate a heater or timer problem.

Dryer Vent Cleaning Maintenance

Did you know that your clothes dryer could cause a house fire? Imagine waking up and your home is on fire and you find out that the fire was started from your clothes dryer. According to the National Fire Protection Agency dryers and washing machines were involved in one out of every 22 home fires in 2006-2010. It all happens because of failure to clean the machines. It is very important to have your dryer installed and serviced by a professional. There are a lot of professional appliance repair companies that specialize in dryer vent cleaning.

Just like you service your vehicle by getting a oil change kenmore dryer repair los angeles, tire rotated, and other maintenance done; you have to do the same for your dryer. Here are some tips to help with your dryer:

Do not use the dryer without a lint filter.
Depending on how often you dry clothes you should at least clean the lint filter twice a week. The build-up of lint in the dryer or in the vent can be ignited from the heat of the dryer causing a flame.
Use a heat resistance flexible duct. This can help prevent a house fire.
Keep dryer in good working order.
Make sure the dryer is plugged into the proper outlet.
Always follow the manufactures operating instructions and never overload a dryer.
Have a dryer vent cleaning done once a year by a dryer vent cleaning professional.
When hiring a dryer vent cleaning professional ask if they use professional commercial grade equipment. Many handy men attempt to clean vents with blowers and cheap tools that can be brought at Lowe’s and Home Depot.

These tools do not get your vent fully cleaned. In addition, there are a lot of handy men and fly by night companies out there so you have to be sure you are dealing with a stable company with a good reputation. Ask the company if they can provide you with a before and after video inspection of the duct. If you have a Whirlpool, ask the technician if he can test your machine with the Whirlpool test kit. This technology can give you an idea on how dirty your vent is. Be sure they test the machines before and after, that way you know if it was successful.

Yearly dryer vent cleanings can also lower electric bills because it cuts back on drying times. If you have never had your dryer vent cleaned; call a company today to get your vent inspected!

Don’t Panic! Get Your Broken Kitchen Appliance Fixed Quickly

With many electrical goods now present in the average home, especially the kitchen we are able to handle most laborious tasks with ease thanks to many helpful appliances like the washing machine, tumble dryer and dishwashers in particular. These appliances can handle the tasks that used to take a long time to complete or required a lot of effort to get the job done right, and even then many people found they had difficulties getting that last spot of dirt out of their clothes or dishes maytag stove and oven repair pasadena.

These appliances are able to operate at temperatures that human hands would struggle to cope with and it is at these elevated temperatures that clothes and dishes get cleaned best. So it isn’t a surprise that when our household appliances break down then we can struggle to cope without them and many people will panic in this situation.

This could force people to rush out to their local shops to get a replacement as soon as possible, but this could lead to a misinformed purchase or not doing the appropriate research when buying something as expensive as a replacement household appliance. Instead there are more options open to your when you find yourself in the situation of one of your important kitchen electrical items no longer working or with annoying problems such as increased noise levels or a loss of effectiveness.

Getting these appliances repaired is by far the smartest move in this situation as your appliance will often only have one part that has become defective that has brought the whole machine crashing down. By getting an experienced professional to fix this appliance quickly you could get that one problematic part or any other issue that has come about repaired and get your appliance running again. Whether it is a leaking gasket on a dishwasher or a motor that has burnt out in a tumble dryer you could get all of these problems and many more fixed for a much smaller cost compared to buying a new model instead.

Of course some washing machines and other appliances that get a lot of intense use will eventually reach the end of their life span but you could get the quick fixes done to buy you a little more time when you need to do some considering when you are in the market for a replacement. Being able to save up money for a replacement model will put the least financial strain on your household and allow you to plan ahead which is something many people will want to do these days.

Taking Care of Your Ovens and Stoves

Your stove is one of those things that are super important, but you never think something is wrong with her until. They want the problem resolved as soon as possible. Find a good repair company oven and keep them on speed dial in the winter is not a bad idea, especially if you live in an old house. Of course, the ideal situation to catch a problem with your oven before it must be fixed, so you do not get with life in a cooler phase of the game. You can do this by educating yourself a little to your particular oven lg stove and oven repair pasadena.

Ovens and stoves are used in cooking; they should always be kept spic and span. The kitchen steward has to make sure that there is no food debris collecting on the sides of the stove burner or inside the oven. Likewise, the kitchen steward also has to make sure that there is no grease and oil buildup since these can easily catch fire, resulting to accidents and injuries. Lastly, the kitchen steward also has to maintain the cleanliness of the ovens and stoves because this is where food is cooked.

As a kitchen steward, you are responsible for cleaning the ovens as well as the stoves in the kitchen. You clean these areas not just to comply with the rules and regulations regarding cleanliness and hygiene, but you also do this for safety reasons. After all, this is one of the dirtiest areas in the kitchen as it gathers not only grease and oil buildup but also gathers food debris and spills. Before cleaning any gas stove or oven surface, be sure the unit is off and completely cooled. Steam burns can occur from wiping a hot surface with a wet cloth or sponge. Follow these guidelines for care and cleaning without damaging your gas stove or gas oven surfaces. The good news is that with proper care, maintenance and use you can reduce the amount of energy each appliance uses, helping the environment and saving you money at the same time.

You should keep electric and gas burners clean. Clean burners reflect heat better use energy more efficiently. Regular cleaning of your gas cook stove will keep it looking as good as the day you bought it, but you need to take care with the cleaning products you use on your gas stove or oven. Many commercial cleansers and abrasives will cause discoloration and can scratch gas stove and oven surfaces. Turn off electric burners two to three minutes before cooking is done and let residual heat take care of the rest. Use a pot or pan that fits the burner. The correct size pot or pan will distribute heat more efficiently, and less heat will be lost into the air. If your stove has radiant or halogen burners, always have a pot or pan on the burner when you turn it on to allow the pot and burner to heat at the same time. A cold pot coming in contact with a hot burner could cause a crack in the stove.

For the ovens, leave the oven door closed. The more you open it to check on cooking food, the more heat you let escape, and the harder your oven has to work to stay heated. If you’re cooking a dish that has a long cook time, such as a turkey, put the dish in as the oven is heating up. Then turn the oven off and allow residual heat to finish the job. If you’re making two dishes that both require oven cooking at about the same temperature, put them in together to take full advantage of the energy used to heat the unit.

You should have with you rubber gloves. Rubber gloves will not only protect your hands from the dirt and grime, but it will also protect your hands from the oven cleaner spray and detergents. However safe the detergent may be, there are still some people who are slightly sensitive to detergents. You should also have with you safety goggles as well as a safety mask when using the oven cleaner spray as the fumes are harmful to your eyes as well as lungs.

Magic Chef Ovens

One of the biggest problems with Magic Chef ovens is not that there’s anything especially wrong with the machine itself, it’s that trying to repair the machine is now nearly impossible.

Seeing as they are no longer being produced these ovens are slowly dying out across the world – not just because none are being made, but because spare parts are so difficult to come by. Magic Chef stopped the production of their most complex pieces of equipment around five years ago, which means they stopped making tumble dryers, cookers and washing machines samsung stove and oven repair pasadena.

As a result the demand for their spare parts has shot up; again this has been further enhanced by the zero production of spare parts as well as whole devices. Their ovens were of relatively low quality as well as low price which made them a great brand for those on lower incomes. Although they weren’t as good as the most costly brands their very cheap cost reflected their lower life expectancy.

One significant problem is however that the people who bought these products were on average on much lower incomes. This means that when the machines started breaking down they were much more willing to get theirs repaired as opposed to buying a whole new one for potentially thousands of dollars.

A big problem with Magic Chef Ovens is that you have a combination of different factors hitting all at once. To start with there’s limited/zero production, low life expectancy and a consumer base that would prefer to repair their machines as opposed to buying whole new ones. This means spare parts for these machines – and in fact all of their hardware is in extreme demand making repairing them a very difficult task.

Who Invented the First Washer?

Centuries ago, sailors used to do their laundry using movement of their ship: they tied underwear to rope and thrown it overboard. Foam jet quickly washed away all the dirt from the fabric. Meanwhile, on the shore people used to rubbing clothes on the rocks, for greater efficiency by using sand as an abrasive. Thus was discovered the first component of the wash – a mechanical effect on the fabric.

As for the second component – the chemicals, a man discovered them a long time ago. The oldest soap was found during the archaeological excavations at the Sapo Hill in Rome. The third component – heat – was noticed to help to wash out even very dirty clothes washer repair altadena.

Thus by years observation people came to the main idea of simultaneous combination of three types of impact on the fabric needed for effective wash: mechanical, chemical and thermal.

In 1851, the American James King patented the first washing machine with a rotating drum.

By 1875 in America alone there were more than 2,000 patents on devices for washing. Not all ideas were viable and developed further. It is clear that, for example, that a washing machine that could wash only one item of clothing at a time had no prospects.

Until the end of XIX century washing machines were mainly driven by muscle power of man or animal.

Revolution in the development of washing machines happened with the invention an electric motor. One of the first washing machines with electric motor «Thor» was released in 1908 by «Hurley Machine Company» from Chicago. The inventor of the machine Alva Fisher made history as the creator of a new class of appliances.

By 1920, in the U.S. more than 1300 (!) Companies produced washing machines. Some of them are long forgotten, others continue to grow and develop. One of these companies, whose glorious career began at the dawn of the twentieth century, is «Whirlpool Corporation». The very first washer was released by them in 1911.

100 years from those days washers become inseparable part of our lives; we can’t live without them even a week and can’t imagine washing our clothing with our own hands. So it becomes really frustrating when washer at home stops working, fortunately, it is not always necessary to buy a new washing machine.

Most of the time the best and most economic solution would be to call a professional washer repair service company and skilled and experienced technician can fix the problem promptly the same day.

The Importance of Appliance Test and Tag Procedures

The health and safety regulations in many countries including require that electrical appliances are tested and proven to be safe for use. There are numerous types of equipment that require testing and then tagging every few months or annually to ensure that they are safe. The interval between each test really depends on the type of the appliance as well as the environment in which it is used. Most hand held or Pass / Fail testing equipment will visibly show a pass or fail which suffices for home and small office use. However, complex equipment is needed to find out more about how a particular piece of electrical equipment is working and if it’s safe to use in the long term. Based on this the equipment then needs to be tagged appliance repair pasadena.

User checks

Appliance test and tag procedures usually includes the testing professional advising the user about potential signs of danger which can result in problems. He will usually inform the user about how reliable the equipment is based on current resistor current flow, transformer efficiency and circuit board condition. For instance, if a power cable is frayed or a plug is cracked, the user will be advised not to plug anything or use the appliance, but rather report this fault to the supervisor. The supervisor can then relay this problem via a poster or a memo. That said user checks need to be carried out prior to every operation but results are not recorded unless a defect has been identified.

Visual inspections

This is usually a process which entails visually looking at an appliance, its plug and cable for signs of wear and tear. The HSE claims that a trained eye can find 90% of the faults. However, many times simply looking at an appliance may not yield reliable results in which case it will require disassembly.

Combined inspections as well as PAT testing

At a few regular intervals all portable appliances need to be tested so that the degree of protection can be identified as adequate. This is especially true in an environment where commercial products are manufactured. A tester will also not only inspect electrical faults but also connected faults like faulty wiring and even identify things like gas leaks and leaks of hazardous materials which may compromise the quality of the products manufactured as well as the lives of the employees.

After inspections have been completed a tag will be assigned to each piece of equipment with a rating. The rating will help users visually identify what precautions they need to take prior to using the equipment and how safe it is to use. Testing and tagging are often two different processes carried out separately.

Appliance test and tagging is mandatory for most businesses. The cheapest way to ensure everything is working as it should is to hire a reputed company that uses the latest equipment and trained personnel. This helps you avoid potential disasters which could affect your insurance and legal standing. You should also make sure that your appliances are insured so that repairs and replacements are covered. It is also important to have an in-house inspector who ensures that everything continues to run smoothly and safely as well as help with general equipment maintenance.

How to Find the Right Appliance Repair Service for You

A broken appliance can spell disaster for your daily routine and the smooth running of your household. Picking up the phone to call an appliance pro when you first notice trouble is a smart thing to do. However, deciding which appliance pro to call is sometimes not an easy decision. Find out what questions to ask and what attributes to look for so that you get the dishwasher or oven repair work that you need, as well as the positive customer experience you deserve kitchenaid dishwasher repair los angeles .

The very first thing to consider when you’re looking for an appliance pro is their list of services and brands. If you have a make, model, or type of appliance that they don’t service, you should move on down your list. If a particular company doesn’t provide information about what type of machines they deal with, make sure you ask and get confirmation that they can work on your particular appliance before booking a service call.

The next thing to consider is when they offer service appointments. If a particular company only offers appointments between 8:00 a.m. and 5:00 p.m., but you don’t even get home from work until 6:00 p.m., then that might not be the right company for you. If you need a night or weekend appointment, take the time to find a company that can meet those needs instead of forcing yourself to fit your schedule into someone else’s framework.

You should also look into what a particular company offers in terms of warranties. A reliable appliance company will usually offer some kind of warranty on parts and labor. That means that if an appliance pro comes in to do a washing machine repair or dishwasher repair, for example, both the work that they do and the parts that they use are guaranteed for a certain amount of time.

Checking out a company’s accreditation is also a prudent thing to do. If you have the option of hiring an appliance company with no accreditation versus a company that’s part of the Better Business Bureau, your local chamber of commerce, or another business association, it’s advisable to go with the accredited firm. When you are going to be paying for a refrigerator repair or dryer repair, it’s in your best interest to hire someone who has made it a point to publicly endorse good business practices.

Having to deal with appliance repairs is stressful enough. Simplify the process for yourself by choosing an appliance repair company that can provide you with the appliance service and the customer service you need.

Washing Machine Repairs Home Help

When a washing machine breaks down, it can often feel like a emergency, but as an appliance engineer with years of experience, I have been called out to what are very minor problems. While I cannot go into great details here and there could be other reasons for the problem, I will present you with 3 common problems along with 3 possible and very simple solutions that do not require you to open the washing machine…

Always unplug the washing machine from the mains power supply before doing any work

1. If your washing machine will not fill up with water at the start of a wash whirlpool washer repair los angeles, but you can hear a light humming noise coming from the back of the washer, as simple as this may sound, check the water as not been turned off, pots, pans, plates, boxes of soap and any other item in the cupboard where the taps are can get pushed up against the tap causing the tap to move to the off position, also especially if you have had work men round check every valve you can safely check before calling a engineer, I have personally been called out many times simply to find my self in the embarrassing position of having to charge our call out charge just to turn a tap back on.

2. If your washing machine will not empty the water or give a fast spin or the clothes are still wet at the end of the wash cycle, you may have a blockage or a faulty pump, blockages can be anywhere on the machine or in the out let drainage plumbing, so I will only go into the very basics here.

First, if you have one on your washer, Check the small filter at the bottom, front of your washer, the cap should unscrew with a simple anticlockwise turn, there maybe a lot of water in the washing machine that will try to escape and could lead to a lot of water on the floor, the trick here is to turn the cap slowly, in a manner that allows you to control the flow of water into a saucepan or bowl, stopping the water flow and emptying the saucepan or bowl as often as needed, once the washer is empty of water you can check inside the filter for any blockage

3. If the door of your washing machine will not open at the end of the wash cycle, again there could be many reasons for this, but a common reason is that the washer as detected that all the water as not emptied, so will keep the door locked to safe guard you from flooding, you can try to empty any water that may be left in the washing machine using the technique mention above for removing a blockage, once you have emptied all the water, there is a very good chance the interlock will release the door after the 2 or 3 minute safety delay.

Opt For Reliable Washer Repair Services

Chicago is a huge metropolitan city and like every other it has a large population that is dependent on commercially available appliances present to make their life comfortable. With large variation in the type and range of products available nowadays, it is often not easy to choose, and we sometimes make a mistake of choosing a wrong piece of device. Also, sometimes there are accidents like tripping over the cord of vacuum cleaner or some carelessness of some novice user in using the food processors. Washers are very prone to such situations and may get easily damaged. Washer repair centers in Chicago, IL can deal with such situations well samsung washer repair pasadena.

A washer is in constant vicinity of water and a device used by any individual every day. Whenever electricity and water are involved, it poses a threat to safety of the machine and the person handling it. Washer repair centers in Chicago, IL, can prevent such situations by taking appropriate measures to curb the problems by insulating the devices properly or even by doing simple things such as finding their right place in the house. They also warn you about the ways and means of operating one and the time when such washers should be changed.

There are plenty of washer repair centers in Chicago, IL and they should be chosen on the basis of factors such as their vicinity from your house, the fee they charge for their services, the reputation that they hold, the time duration they take to fulfill their services and the previous experience if any that the customer has. They may be a part of retail that repairs a number of appliances or they may be outlets specializing in repair of washers.

The online world now has resources and videos that are available for self help, but sometimes repair of washers might not just be worth the risk. It is better off to let such things be left to experts. Care must also be taken that right charges are applied for the services that are given and we are not extorted. Number of such businesses can be found easily online using directories, portals, websites and maps. If possible, the reviews of such washer repairs found locally in Chicago must be read to find the most suitable washer repair center. Best deals for you must be found that suit your requirement. Washers which are damaged must in any case however not be left unattended as they may pose serious risk to our lives as well as disrupt the peaceful life that we enjoy.